banner



How To Transport Paddle Board In Truck

How to Ship a Paddle Board Safely

In this article we will expect at:

  • Transporting a paddle board by truck

  • Transporting a paddle lath by automobile

  • How to necktie down a SUP on a roof rack

  • Soft rack systems for paddle boards

  • How to send a paddle board without a rack

  • Difficult rack systems for paddle boards

transporting paddle board on car
transporting a paddle board with soft racks

Transporting a SUP Safely

Transporting a paddle lath correctly is an important function of the action that often gets neglected. Paddle boards are not cheap. Information technology'southward easy to ding or impairment your board when moving it around. The worst dings on a board occur outside the water and dings add upwardly quickly if your not conscientious.

By the end of the year that nice new board could look like crap and have serious impairment. If you ding your board badly and expose the cream it could outcome in serious h2o damage. If the core is exposed to water it tin can permanently ruin your board. It definitely pays to be careful when moving your surfboard or SUP.

I am going to presume you lot can't fit your lath(s) inside your car and that you have to mount them on your roof. Most shortboards will fit inside a car but longboards and stand up paddleboards will not.

Transporting a Paddle Lath by Truck

Trucks beds can work fine for transporting your lath. In fact, it is my preferred method for moving my xi′ longboard and 10′ paddleboard.

It's important that you use plenty of padding and that your board is secure and will not movement around and blindside confronting the side of the truck. The nose of the board is heavier and should go in first almost the cab of the truck.

I place plenty of padding effectually the olfactory organ of the lath and place the nose up against the bottom back of the truck bed. If the lath is long I will put a sandbag on the nose to go along information technology down.

Now I employ bungee cords to secure the middle of the board. I wrap a bungee cord around the lath and then hook it to the clasps inside the truck bed.

It Don't Look Pretty Merely It Works

transporting a paddle board in a truck
Foam protecting the olfactory organ, sandbag and bungee cords for stability.
transporting a paddle board in a truck bed
That's an 11′ longboard in an South-ten pickup.
transporting paddle board in a truck bed strapped down and padded for protection
Stand upward paddle board in truck bed

Then I lift the tailgate and place the back cease of the board on top. The fins should be facing upward to the sky. You will need some tailgate padding to protect your board and the tailgate. You tin buy a fancy foam pad created for a truck tailgate (like this one by Yakima you can see here on Amazon) or use any piece of foam or a thick towel.

Side by side utilize leap loaded cam straps to secure the lath to the tailgate. I would not utilise bungee cords hither. And for certain don't use ratchet straps. You tin can hands over-tighten them without knowing it and damage the track of your lath. If your truck bed is brusk and the lath is existent long you may want to put a red flag on the end to alert other drivers.

Truck Bed Extenders for a Paddle Board

using a truck bed extender to transport a paddle board by truck

Truck bed extenders accept become pop for transporting paddle boards by truck. Nearly of the paddlers I know who ain a truck and have a hard paddle lath use extenders.

Truck bed extenders seem to piece of work well and are multi-purpose. You can employ them for hauling ladders, lumber, etc.

If y'all determine to go with an extender to send your paddle board just brand certain y'all use some type of padding on the metallic support bar to protect yous paddle lath.

MaxxHaul and Erickson make pop truck bed extenders and you lot can meet the cost on Amazon here.

use padding to protect your paddle board when transporting by truck

Transporting two paddle boards

If you lot are transporting more i lath put the longest board in first. Then identify them 1 on elevation of the other with a towel or t-shirt between them. The fins should all be facing up. Wrap the straps and bungee cords tightly effectually all the boards.

Transporting a Paddle lath by Car

About surfers and paddlers transport their boards on the tiptop of a machine. To secure your board to the superlative of your automobile you can apply either a soft rack, hard rack or no rack at all. A longboard or a SUP will really human activity like a fly on your automobile. While your machine is not going to take off flying the wind will put an enormous load on your rack testing its stability. So you exercise need to accept care to make certain your board is very secure.

Soft Racks

 Inexpensive simply not as stable as hard racks.

Soft racks volition exercise the trick but are not as secure a hard racks. The main do good to soft racks are that they are much cheaper to buy than hard racks. Soft racks will cost you lot $30-$50. Good soft racks are bachelor from FCS, OAM, Body of water Earth and Curve.  I own a Curve and it works fine.

These are soft pads that you identify directly on top of your car and your lath goes on the pads. Soft racks are removable  systems that are non as secure every bit a fixed difficult rack. Soft racks are installed when moving the lath and then removed and stored afterwards the lath is transported. They take little space to store as you can run across from the photo below of my Curve rack. You can see the Curve soft rack I use right hither on Amazon

curve soft surfboard or paddle board car rack
This is my Curve Soft Rack. And yes that is snowfall.

To secure a lath with a soft rack you lay the pads on the roof of your car. There should be 2 pads. Although there are different systems, for most brands you run the straps through your windows and so you create a loop around the roof of your car. Lay your board on top of the pads. The fins of the lath should be facing up to the sky and in the forepart of the car, with the olfactory organ of the board in the rear.

Secure the board with the two jump loaded cam straps that came with your system. Do not use ratchet straps. They overtighten easily and can damage the rails of your board. And y'all might consider a board board. Twenty-four hours bags will protect your board from dings and the sun. They make good sense and I am always surprised I don't see more of them.

Olfactory organ & tail lines for peace of mind

Bow & stern straps are always a expert idea. If you are securing a longboard or a SUP I would definitely use nose and tail lines to secure your lath. This volition give you more security if you are traveling at high speeds or a long distance.

Yakima makes a nice prepare-to-go nose and tail necktie-downwards system called theBrah Necktie-Down System (see here on Amazon). The Brah system ties down speedily and doesn't need to apply ballast points on your lath. These volition help secure your board downward solid and offer peace of listen when you are on the road.

Yous tin apply a soft rack to secure multiple boards. Put the longest board down outset. Identify a towel between the boards. All the boards should have the fins pointing upward, and the fins should all be in front of the automobile, the nose in rear. Tie them all down tight and secure.

How to Strap a SUP to a Car Without Roof Racks

DIY Soft Racks for your Car

diy surfboard car rack
Two pieces of foam and cam straps become a DIY lath rack.

Nigh softs racks are basically just 2 foam pads and two spring loaded cam straps. If you accept a couple of long thick pieces of closed cell foam laying around and 2 cam straps you can rig upwardly your own surfboard or SUP motorcar rack. Place the pieces of cream broad on your car roof, close to your windshield and rear window. Put your lath on the pads with the fins in front and facing upward toward the sky. Run the straps through your car windows and tighten the cams inside your car, keep them at that place. This will offering a little chip of security, someone would have to cut the straps to steal your lath.

While these DIY racks will go the job done be sure that your boards are secured down snug and won't move. Exercise non use ratchet straps that will damage the rail of your board. If you utilise this DIY method information technology would be a practiced idea to utilize nose and tail tie-down lines. For nigh $25 y'all can buy the Yakima Brah Organisation that will secure your boards from bow to stern and give you slice of heed on the road.

How to strap a SUP to a car without roof racks (video)

The Theft Problem Using a Soft Rack or Truck Bed

If you use a soft rack or your truck bed your paddle board tin hands exist stolen when you lot go for a post session beer with your buddies. Granted an 11′ paddle board presents a challenge for a theft simply they exercise get stolen off soft racks.

Notwithstanding at that place is an like shooting fish in a barrel solution. You can purchase a cable lock system for your SUP that attaches to the fin box or leash plug bar. These work great and are a game changer if you have been driving straight home after your session. You tin can even lock your board to a bike rack or lampost while you accept a break. Here is a adept SUP cable lock system on Amazon

How to Transport a Paddle Board or Stay Home like a Loser 1
How to Transport a Paddle Board or Stay Home like a Loser 2

Hard Racks

Expensive only secure

Improve than soft racks are hard racks. Made by companies like Thule and Yakima, these racks are very stable. These systems are real slick and make it easy to transport your board without any hassle or worry. However they are much more than expensive than soft racks. What much will a hard rack cost yous? If you lot need a hard rack base system that volition set yous dorsum $350-500.

If you are lucky enough to have a vehicle with fixed crossbars or already have a base organisation, you can purchase a SUP/Surfboard attachment like the Thule SUP Taxi (see current toll on Amazon.  which will set you back about $270. Or you can just buy a couple pads designed to fit over the crossbars (see on Amazon hither). Then you strap your board down with a cam strap. This is much cheaper. Yous can get a nice prepare of these pads for $20-seventy.

A hard-rack setup with cross-bars is the style to get if you have the money. The same rules utilize every bit when using a soft rack. The boards are placed with the fins upward and on the front of the vehicle. The nose of the board in the rear. Make sure the boards are properly balanced with the weight evenly distributed on the cross confined. Secure with cam straps and never use ratchet straps that can damage the runway of your lath.

I would still use olfactory organ and tail lines to brand sure everything is secure. Yakima Brah is a expert nose and tail tie down set upwardly. Better safe than sorry. And a board purse is ever a good thought to protect your board from dings and the lord's day.

Thule and Yakima are the industry leaders in hard rack carriers for stand up paddle boards, surfboards, bicycles and anything else you want to conduct on the acme of your machine. In the first video below you can see the Thule 810 SUP Taxi in action. In the 2d video you can watch the Yakima SupPup being installed. Besides being easy to use and super stable you can lock your SUP or surfboard up with a cardinal and don't have to worry about it being stolen off the summit of your car. If your boards are going to be on the meridian of your automobile for about of the day I strongly suggest yous buy a reflective mean solar day bag to protect it from the sun and heat.

Dig Deeper: Inflatable Paddle Board Pros and Cons

Dig Deeper: Why Traveling with an Inflatable SUP makes Good Sense

Source: https://www.theseasonedsurfer.com/transport-a-paddle-board/

0 Response to "How To Transport Paddle Board In Truck"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel